Shrink Wrapping or bundle wrapping is the process of wrapping an item or group of a single product. A Shrink Wrapping Machine, both automatic and semi-automatic, is used for this purpose. The heat shrinks and conforms to the shape of the strongly attached material. Wrapping or packaging is established to increase the increased packaging price and the rate of secondary packaging.
There is a Shrink Wrapping Machine consisting of a stainless steel finished and tubular heater for low power consumption and highest heat transfer. Temperature can be controlled for the exact amount of heat supply. The best quality shrink wrap is achieved with the help of a heavy duty blower that ensures an adequate amount of heat transfer. The machine comes with a premium insulating material called rock wool on the machine panel. The conveyor rod of the machine passing through the hot shrink tunnel is found to be coated with a silicon tube.
Most people do not really think about how the machine actually works. The work of this Shrink Wrapping Machine involves the control of many particles such as polymers are long atoms found in plastics where they are bent. When they are made into plastic films to shrink or wrap the bundle, the atoms are stretched upright. The films are then positioned around the products that need to be wrapped.
Once the films are exposed, the films shrink due to heat, allowing these polymers to return to their normal entangled state and PVC can shrink to about fifty percent of its different size. Polyvinyl shrink wrap films provide stronger seals than PVC and have the highest quality stripping down.
Choosing the ideal Shrink Wrapping Machine according to industrial needs is to first understand the whole process and what one wishes to achieve. The motivation behind the wrap has to be a consideration of what range sizes are needed, how fast changes will be required, and how fast the products will need to be wrapped, all taken into consideration. Whatever the requirements are, removed wrap machines of different models are now available to meet all applications.
How to Shrink Wrapping Machine Maintenance? Mainly consists of six parts
1. Check the Machine Regularly: After daily work, the wire should be cleaned and maintained with a wire brush and film release agent. Always apply lubricant to moving parts. To perform a full range of routine inspections, the degree of aging parts for timely replacement.
2. Power Numerator: We should notice the label on the machine nameplate. In actual operation, the power input power must be greater than or equal to the nameplate marking instructions to prevent internal wiring or machine components from burning.
3. Electrical Environment: When working, first ventilate and then activate. When the machine turns off, first cut off the power and then cut off the gas.
4. Environmental Conditions: Shrink Wrapping Machine should be used in an environment where the temperature is -10 ℃ -50 ℃, relative humidity does not exceed 85%, there is no corrosive gas, no dust and no air in the surrounding air there is any explosive danger.
5. Planted: The installation should be placed horizontally to ensure the normal operation of the electric heat pipe and its service life. If the installation angle of the machine transmitted by the network belt is incorrect, the center will deviate.
6. Clean: The heating strip and silica gel strip will be kept clean, and foreign matters will not be followed, so as to avoid affecting the quality of sealing.
0 Comments